N5K with N2K FEX vPC
1. Attach FEX 1.1 Configure FEX on both N5Ks Since vPC is not enabled yet, N5K-1 configured with FEX will...
N9K vPC Track
The HSRP is configured on vPC. The active HSRP router is SD001. If the L3 uplink is down, the traffic...
Cisco N9k – Double-Sided vPC
1. Test Environment Double-sided vPC is also called Back-to-Back vPC. Test devices are: 2. Config 3. Show Output 4. Troubleshooting...
N9K – Migration from one vPC Pair to Another Pair with HSRP
Initial config: 1. Initial Config 2. Initial Status 2.1 STP Status Since there are 2 independent L2 links between 2...
Cisco N9K 9364C GX – IPSLA & HSRP
Background: The idea scenario is HSRP configured under SVI interface which runs over the vPC port-channel. 1. IP SLA 1.1...
Cisco N9K 9364C GX – NXOS & EPLD Upgrade
This to upgrade N9K 9364C GX from 10.4(3)F to 10.4(4)M. 1. Copy & Verify Image Nexus-9364C-GX# copy usb1:nxos64-cs.10.4.4.M.bin bootflash: Nexus-9364C-GX#...
Cisco Nexus Switch Stuck in Loader
It seems the bootflash is corrupted. I have tried other images. But I got the same error. loader> help ?...
Cisco N9K 93180YC FX3 – NXOS & EPLD Upgrade
NXOS Version Upgrade 1. Copy & Verify Image 2. Upgrade NXOS Version 2.1 Check Current Version & Bootvar Check boot...
Cisco N9k HSRP Config over vPC
Assume vPC is already configured as shown in the attached post. 1. Enable the Features 2. Configure HSRP 3. Check...