Cisco N9K 93180YC FX3 – NXOS & EPLD Upgrade
NXOS Version Upgrade
1. Copy & Verify Image
N9K-93180YC-FX# copy usb1:nxos64-cs.10.4.4.M.bin bootflash:
N9K-93180YC-FX# show file bootflash:nxos64-cs.10.4.4.M.bin md5sum
366ef574de8899b7179e75dc6856492f2. Upgrade NXOS Version
2.1 Check Current Version & Bootvar
Check boot variable.
N9K-93180YC-FX# show boot
Current Boot Variables:
sup-1
NXOS variable = bootflash:/nxos.9.3.10.bin
Boot POAP Disabled
Boot Variables on next reload:
sup-1
NXOS variable = bootflash:/nxos.9.3.10.bin
Boot POAP DisabledCheck current version.
N9K-93180YC-FX# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (C) 2002-2022, Cisco and/or its affiliates.
All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under their own
licenses, such as open source. This software is provided "as is," and unless
otherwise stated, there is no warranty, express or implied, including but not
limited to warranties of merchantability and fitness for a particular purpose.
Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or
GNU General Public License (GPL) version 3.0 or the GNU
Lesser General Public License (LGPL) Version 2.1 or
Lesser General Public License (LGPL) Version 2.0.
A copy of each such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://opensource.org/licenses/gpl-3.0.html and
http://www.opensource.org/licenses/lgpl-2.1.php and
http://www.gnu.org/licenses/old-licenses/library.txt.
Software
BIOS: version 05.51
NXOS: version 9.3(10)
BIOS compile time: 11/29/2023
NXOS image file is: bootflash:///nxos.9.3.10.bin
NXOS compile time: 7/8/2022 9:00:00 [07/08/2022 18:10:17]
Hardware
cisco Nexus9000 C93180YC-FX Chassis
Intel(R) Xeon(R) CPU D-1528 @ 1.90GHz with 24569332 kB of memory.
Processor Board ID FDO1234567V
Device name: N9K-93180YC-FX
bootflash: 115805708 kB
Kernel uptime is 14 day(s), 19 hour(s), 2 minute(s), 4 second(s)
Last reset at 982267 usecs after Wed Jan 1 01:38:18 2025
Reason: Reset Requested by CLI command reload
System version: 9.3(10)
Service:
plugin
Core Plugin, Ethernet Plugin
Active Package(s):2.2 Check Upgrade Path
If it is not a direct upgrade, you have to follow the path to upgrade versions.
2.3 Upgrade NXOS Version
Check the compatibility first.
s7# show install all impact nxos bootflash:nxos64-cs.10.4.4.M.bin
Installer will perform impact only check. Please wait.
Verifying image bootflash:/nxos64-cs.10.4.4.M.bin for boot variable "nxos".
[####################] 100% -- SUCCESS
Verifying image type.
[####################] 100% -- SUCCESS
Preparing "nxos" version info using image bootflash:/nxos64-cs.10.4.4.M.bin.
[####################] 100% -- SUCCESS
Preparing "bios" version info using image bootflash:/nxos64-cs.10.4.4.M.bin.
[####################] 100% -- SUCCESS
Performing module support checks.
[####################] 100% -- SUCCESS
Notifying services about system upgrade.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes disruptive reset default upgrade is not hitless
27 yes disruptive none default upgrade is not hitless
Images will be upgraded according to following table:
Module Image Running-Version(pri:alt) New-Version Upg-Required
------ ---------- ---------------------------------------- -------------------- ------------
1 lcn9k 10.4(4) 10.4(4) no
27 nxos 10.4(4) 10.4(4) no
27 bios v01.09(10/08/2023):v01.08(05/06/2022) v01.09(10/08/2023) noIt first performs the compatibility check and show the result. It asks to continue before a reload.
N9K-93180YC-FX# install all nxos bootflash:/nxos64-cs.10.4.4.M.bin
Installer will perform compatibility check first. Please wait.
Installer is forced disruptive
Verifying image bootflash:/nxos64-cs.10.4.4.M.bin for boot variable "nxos".
[####################] 100% -- SUCCESS
Verifying image type.
[####################] 100% -- SUCCESS
Preparing "nxos" version info using image bootflash:/nxos64-cs.10.4.4.M.bin.
[####################] 100% -- SUCCESS
Preparing "bios" version info using image bootflash:/nxos64-cs.10.4.4.M.bin.
[####################] 100% -- SUCCESS
Performing module support checks.
[####################] 100% -- SUCCESS
Notifying services about system upgrade.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes disruptive reset Incompatible image for ISSU
Images will be upgraded according to following table:
Module Image Running-Version(pri:alt) New-Version Upg-Required
------ ---------- ---------------------------------------- -------------------- ------------
1 nxos 9.3(10) 10.4(4) yes
1 bios v05.51(11/29/2023):v05.39(08/30/2019) v05.51(11/29/2023) no
Switch will be reloaded for disruptive upgrade.
Do you want to continue with the installation (y/n)? [n] y
Install is in progress, please wait.
Performing runtime checks.
[####################] 100% -- SUCCESS
Setting boot variables.
[####################] 100% -- SUCCESS
Performing configuration copy.
[####################] 100% -- SUCCESS
Module 1: Refreshing compact flash and upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS
Finishing the upgrade, switch will reboot in 10 seconds.
N9K-93180YC-FX#
CISCO MODULE
BIOS Ver: 5.51
Switch G5
RC Revision: 02.03.00
Memory Information:
MRC Revision:00.50.00
Total DRAM: 24576 MB
Memory TOLM: 80000000
PCIE BASE: 80000000 Size : 10000000
PCI32 BASE: 90000000 Limit: FBFFFFFF
PCI64 BASE: 80000000000 Limit: 83FFFFFFFFF
UC START: 80000000000 End : 84000000000
ME Operational Firmware Version: 06:3.0.3.214
DIMM Information:
Clock Speed: 1067MHz
Socket: 0x0 Channel: 0x0 Number: 0x0 Presence: Yes Size: 16GB
Socket: 0x0 Channel: 0x0 Number: 0x1 Presence: No
Socket: 0x0 Channel: 0x1 Number: 0x0 Presence: Yes Size: 8GB
Socket: 0x0 Channel: 0x1 Number: 0x1 Presence: No
Detected CISCO IOFPGA
Booting from Primary BIOS
Code Signing Results: 0x0
Booting from Upgrade FPGA
IOFPGA Subsystem Vendor ID 0x1172
FPGA Revision : 0x1000023
FPGA ID : 0x1564687
FPGA Date : 0x20221116
Power Debug Register1 : 0x0
Power Debug Register2 : 0x9002f
Reset Cause Register : 0x1
Boot Ctrl Register : 0xe0ff
FPGA Update Status : 0x20
Detected CISCO MIFPGA
MIFPGA Subsystem Vendor ID 0x1172
MIFPGA Version : 0x10
MIFPGA Date : 0x20170515
MIFPGA Update Status : 0x20
MIFPGA ID : 0x1555231
Board Type: SUMPIN
Bootable Disk is detected. Device Name: INTEL SSDSCKKB240G8K
Version 2.18.1260. Copyright (C) 2023 American Megatrends, Inc.
FPGA SPI Flash MfgId=0xC2, DevId=0x2017, DevSize=0x17
Board type 4
IOFPGA @ 0xd8000000
SLOT_ID @ 0xf
Set fan speed to 60%
Initializing fan controller...
Standalone chassis
check_bootmode: grub: Continue grub
Trying to read config file /boot/grub/menu.lst.local from (hd0,5)
Filesystem type is ext2fs, partition type 0x83
Security Lock
Booting bootflash:/nxos64-cs.10.4.4.M.bin
Trying diskboot
Filesystem type is ext2fs, partition type 0x83
Image valid
Image Signature verification was Successful.
Boot Time: 1/15/2025 21:1:52
Security Lock
mount: overlay mounted on /newroot/usr.
Installing klm_card_index
done
Linking n9k flash devices
creating flash devices BOOT_DEV= sda
Replacing inittab for node - host
INIT: version 2.88 booting
Setting up sysV scripts for host node
Installing ata_piix module ... done.
Installing kheaders module ... done.
Unsquashing rootfs ...
is_lxc:1 is_titan_eor: is_stby: suffix: klm_ftrace: /isanboot/lib/modules/klm_ftrace.o
Installing ftrace in lxc 0 mode done
Executing /etc/rc.d/rcS.d//S06exablaze start
Executing /etc/rc.d/rcS.d//S06exablaze start
Not Micron SSD...
Checking all filesystems.cgroups initialized
Generating ssh keys...Done ssh keys
Starting OpenBSD Secure Shell server: sshd ... done sshd.
Checking rpmstore swap in host context.
INIT: Entering runlevel: 3
Stopping crond: OK
Starting crond: OK
grep: /bootflash/platform.inf: No such file or directory
mount: overlay mounted on /usr.
Linking n9k flash devices
creating flash devices BOOT_DEV= sda
Replacing inittab for node - vsup
INIT: version 2.88 booting
Executing /etc/rc.d/rcS.d//S06exablaze start
Executing /etc/rc.d/rcS.d//S06exablaze start
Unsquashing rootfs ...
vm.min_free_kbytes = 138240
No TOR virtual chassis
skip untra_klms
Enabling 8250 serial driver spurious INTs workaround
Installing isan procfs isan_proc_name=isan26... done.
Installing SSE module with card index 21135 and vslot ID 26 ... done.
Creating SSE device node 243 ... done.
cg controllers already mounted at /var/cgroup
Inserting kernel_services module ... done.
Making kernel_services character devices
is_lxc:1 is_titan_eor: is_stby:0 suffix: klm_ftrace: /isanboot/lib/modules/klm_ftrace.o
klm_ftrace already loaded. skip.
Loading I2C driver ... done.
Installing CCTRL driver for card_type 54 in vslot ID 26 without NEED_GEM ... done.
Loading IGB driver ... done.
Checking all filesystems.
Installing SPROM driver ... 21135 Extracting rpms from image...
IS_N9K done.
Installing pfmsvcs module ...done.
Installing nvram module ... done.
Installing if_index module with port mode 6 ... done.
Installing fcfwd
Installing RNI lcnd ... done
Running mode is N9K-ToR ...done
Installing LC netdev container_id=0 is_standby=0 ... done
Installing psdev module ... done.
Installing veobc module ... done.
Clean up previous pcap files present in tmp directory
Checking SR card
Card Index is 21135
Inserting eMMC module ...
Inserting OBFL module ... 22.25: eMMC Device found.
22.26: card has mmc
done.
22.26: Making OBFL character devices for mmc
mounting plog for N9k!
22.31: mounting plog for N9k!
22.32: Done..mounting plog for N9k!
Mounting OBFL for eMMC
Attach blkoops
23.75: Before mounting blkoops
23.75: After mounting blkoops
23.76: recreate_mmcftrace_rr_device
/
Calling install_tor for TOR
copying common rpm to ftp
update-alternatives: Linking /usr/bin/unshare to /usr/bin/unshare.util-linux
COPY the image to ORIG_LC_FS_PATH
tune2fs 1.45.6 (20-Mar-2020)
Setting reserved blocks percentage to 0% (0 blocks)
Removing any system startup links for cgroups-init ...
Adding system startup for /etc/init.d/cgroups-init.
/logflash/stats_ssd/.ssd_overall_data file exist !!
moving /logflash/stats_ssd/.ssd_overall_data to /logflash/stats_ssd/.ssd_lastboot_data
Starting crond: OK
Loading system software
kernel.core_pattern = |/bin/sparsecore.sh %p %h %P
Starting rpcbind daemon...done.
Generating ssh keys...creating NFS state directory: done
starting 8 nfsd kernel threads: done
starting mountd: done
starting statd: done
Saving image for img-sync ...
exit code: 1
Installing local RPMS
Not Micron SSD...
Not Micron SSD...
Not Micron SSD...
Stopping crond: OK
Done ssh keys
Starting OpenBSD Secure Shell server: sshd ... done sshd.
grep: /bootflash/platform.inf: No such file or directory
Starting crond: OK
Patch Repository Setup completed successfully
Creating /dev/mcelog
Starting mcelog daemon
N9K CPA setup done
N9K TOR LC CPA setup done
INIT: Entering runlevel: 3
Running S93thirdparty-script...
vlc_card_index 0
S26: sw_id 21135 vp 0
S26 B: sw_id 21135, Moving libcrdcfgdata_tah_tor.so to libcrdcfgdata.so
Starting lem_drv driver
done
Netbroker support IS present in the kernel.
done
Disabling cisco netbroker hooks ... done
Skipping EMON in TOR ...
Executing Prune clis.
Removing exusd cli files if it is not exbl_card in prune_clis
ethernet switching mode Wed Jan 15 21:02:52 UTC 2025
prepare span CLI
2025 Jan 15 21:03:04 N9K-93180YC-FX %$ VDC-1 %$ %USER-2-SYSTEM_MSG: <<%USBHSD-2-MOUNT>> logflash: online - usbhsd
2025 Jan 15 21:03:05 N9K-93180YC-FX %$ VDC-1 %$ %DAEMON-2-SYSTEM_MSG: <<%ASCII-CFG-2-CONF_CONTROL>> Binary restore - ascii_cfg_server[16536]
2025 Jan 15 21:03:05 N9K-93180YC-FX %$ VDC-1 %$ %DAEMON-2-SYSTEM_MSG: <<%ASCII-CFG-2-CONF_CONTROL>> Restore DME database - ascii_cfg_server[16536]
2025 Jan 15 21:03:08 N9K-93180YC-FX %$ VDC-1 %$ netstack: Registration with cli server complete
2025 Jan 15 21:03:09 N9K-93180YC-FX %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detected the presence of Module 1
2025 Jan 15 21:03:09 N9K-93180YC-FX %$ VDC-1 %$ %PLATFORM-2-PS_FAIL: Power supply 1 failed or shut down (Serial number LIT23362A3A)
2025 Jan 15 21:03:09 N9K-93180YC-FX %$ VDC-1 %$ %PLATFORM-2-PS_OK: Power supply 2 ok (Serial number LIT233625WV)
2025 Jan 15 21:03:09 N9K-93180YC-FX %$ VDC-1 %$ %PLATFORM-2-PS_FANOK: Fan in Power supply 2 ok
2025 Jan 15 21:03:09 N9K-93180YC-FX %$ VDC-1 %$ %PLATFORM-2-PS_ABSENT: Power supply 1 is absent/shutdown, ps-redundancy might be affected
2025 Jan 15 21:03:09 N9K-93180YC-FX %$ VDC-1 %$ %PLATFORM-2-PS_RED_MODE_CHG: Power supply operational redundancy mode changed to non-redundant
2025 Jan 15 21:03:20 N9K-93180YC-FX %$ VDC-1 %$ %USER-2-SYSTEM_MSG: ssnmgr_app_init called on ssnmgr up - aclmgr
2025 Jan 15 21:03:22 N9K-93180YC-FX %$ VDC-1 %$ %USER-1-SYSTEM_MSG: VP aclqos tah stats get - pltfm_config
2025 Jan 15 21:03:26 N9K-93180YC-FX %$ VDC-1 %$ %USER-2-SYSTEM_MSG: Nexus Intersight Device Connector Feature is enabled by default. - intersight
2025 Jan 15 21:03:27 N9K-93180YC-FX %$ VDC-1 %$ %USER-2-SYSTEM_MSG: Installing thirdparty RPMs - /thirdparty_install.py
2025 Jan 15 21:03:28 N9K-93180YC-FX %$ VDC-1 %$ %USER-0-SYSTEM_MSG: end of default policer - copp
2025 Jan 15 21:03:33 N9K-93180YC-FX %$ VDC-1 %$ %CARDCLIENT-2-FPGA_BOOT_PRIMARY: IOFPGA booted from Primary
2025 Jan 15 21:03:33 N9K-93180YC-FX %$ VDC-1 %$ %CARDCLIENT-2-FPGA_BOOT_PRIMARY: MIFPGA booted from Primary
2025 Jan 15 21:03:35 N9K-93180YC-FX %$ VDC-1 %$ %ASCII-CFG-2-CONFIG_REPLAY_STATUS: Bootstrap Replay Started.
2025 Jan 15 21:03:35 N9K-93180YC-FX %$ VDC-1 %$ %ASCII-CFG-2-CONFIG_REPLAY_STATUS: Bootstrap Replay Done.
2025 Jan 15 21:03:35 N9K-93180YC-FX %$ VDC-1 %$ %VDC_MGR-2-VDC_ONLINE: vdc 1 has come online
2025 Jan 15 21:03:35 N9K-93180YC-FX %$ VDC-1 %$ %PLATFORM-2-MOD_PWRUP: Module 1 powered up (Serial number FDO2347128V)
User Access Verification
N9K-93180YC-FX login: admin
Password: EPLD Upgrade
1. Copy & Verify Image
N9K-93180YC-FX3# copy usb1:n9000-epld.10.4.4.M.img bootflash:
N9K-93180YC-FX3# show file bootflash:n9000-epld.10.4.4.M.img md5sum
c2c5ecaf140ff954f5943d3d8ca636012. Check Upgrade Impact
N9K-93180YC-FX3# show install all impact epld bootflash:n9000-epld.10.4.4.M.img
Retrieving EPLD versions.... Please wait.
Images will be upgraded according to following table:
Module Type EPLD Running-Version New-Version Upg-Required
------ ---- ------------- --------------- ----------- ------------
1 SUP MI FPGA 0x18 0x20 Yes
1 SUP IO FPGA 0x13 0x13 No
27 SUP MI FPGA 0x18 0x20 Yes
27 SUP IO FPGA 0x13 0x13 No
Compatibility check:
Module Type Upgradable Impact Reason
-------------------------------------------------
27 SUP Yes disruptive Module Upgradable
N9K-93180YC-FX3# show module
Mod Ports Module-Type Model
Status
--- ----- ------------------------------------------------ ---------------------
--------
1 54 48x10/25G + 6x40/100G Ethernet Module N9K-C93180YC-FX3
ok
27 0 Virtual Supervisor Module N9K-C93180YC-FX3
active *
Mod Sw Hw Slot
--- ----------------------- ------ ----
1 10.4(4) 1.0 NA
27 10.4(4) 1.0 VSUP
Mod MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
1 24-6c-84-74-3b-a5 to 24-6c-12-74-3b-67 FLM12345JDP
27 24-6c-84-74-3b-a5 to 24-6c-12-74-3b-67 FLM123450JDP
Mod Online Diag Status
--- ------------------
1 Pass
27 Pass
* this terminal session
3. Upgrade EPLD
N9K-93180YC-FX3# install epld bootflash:n9000-epld.10.4.4.M.img module all
Compatibility check:
Module Type Upgradable Impact Reason
------ ----------------- ---------- ---------- ------
27 SUP Yes disruptive Module Upgradable
Retrieving EPLD versions.... Please wait.
Images will be upgraded according to following table:
Module Type EPLD Running-Version New-Version Upg-Required
------ ---- ------------- --------------- ----------- ------------
27 SUP MI FPGA 0x18 0x20 Yes
27 SUP IO FPGA 0x13 0x13 No
The above modules require upgrade.EPLD Upgrade may result in multiple modules going offline.
The switch will be reloaded at the end of the upgrade
Do you want to continue (y/n) ? [n] y
Proceeding to upgrade Modules.
Starting Module 27 EPLD Upgrade
Module 27 : MI FPGA [Programming] : 100.00% ( 128 of 128 sectors)
Module 27 EPLD upgrade is successful..
Module Type Upgrade-Result
------ ------------------ --------------
27 SUP Success
Module 27 EPLD upgrade is successful.
Module Type Upgrade-Result
------ ------------------ --------------
27 SUP Success
Reseting Active SUP (Module 27) FPGAs. Please wait...
Reload in 10 seconds .....
s9# ISCO MODULE
BIOS Ver: 1.09
Switch G10
RC Revision: 02.05.00
Memory Information:
MRC Revision:00.50.00
Total DRAM: 32768 MB
Memory TOLM: 80000000
PCIE BASE: 80000000 Size : 10000000
PCI32 BASE: 90000000 Limit: FBFFFFFF
PCI64 BASE: 80000000000 Limit: 83FFFFFFFFF
UC START: 80000000000 End : 84000000000
ME Operational Firmware Version: 06:3.0.3.214
DIMM Information:
Clock Speed: 1067MHz
Socket: 0x0 Channel: 0x0 Number: 0x0 Presence: Yes Size: 16GB
Socket: 0x0 Channel: 0x0 Number: 0x1 Presence: No
Socket: 0x0 Channel: 0x1 Number: 0x0 Presence: Yes Size: 16GB
Socket: 0x0 Channel: 0x1 Number: 0x1 Presence: No
Detected CISCO IOFPGA
Booting from Primary BIOS
Code Signing Results: 0x00000000
Booting from Upgrade FPGA
IOFPGA Subsystem Vendor ID 0x10ee
FPGA Revision : 0x00000013
FPGA ID : 0x16905326
FPGA Date : 0x20230511
Power Debug Register1 : 0x00000000
Power Debug Register2 : 0x00000007
Reset Cause Register : 0x80000000
Boot Ctrl Register : 0x0000e0ff
FPGA Update Status : 0x80000020
Detected CISCO MIFPGA
MIFPGA Version : 0x00000020
MIFPGA Date : 0x20240229
MIFPGA Update Status : 0x00000020
MIFPGA ID : 0x21310951
Board Type: Superfuzz
Bootable Disk is detected. Device Name: INTEL SSDSCKKB240G8K
Feed BIT1
Feed BIT2
HermitD BIOS: v01.09.0 Date: 10/08/2023 17:12:31
Board type 4
CISCO TOR
IOFPGA @ 0xd8000000
SLOT_ID @ 0xf
Set fan speed to 100%
Initializing fan controller...
Standalone chassis
check_bootmode: grub: Continue grub
Trying to read config file /boot/grub/menu.lst.local from (hd0,5)
Filesystem type is ext2fs, partition type 0x83
Security Lock
Booting bootflash:/nxos64-cs.10.4.4.M.bin
Trying diskboot
Filesystem type is ext2fs, partition type 0x83
Image valid
Image Signature verification was Successful.
Boot Time: 1/22/2025 6:15:33
Security Lock
mount: overlay mounted on /newroot/usr.
Installing klm_card_index
done
Increase FPGA PCI timeout to 900ms
Linking n9k flash devices
creating flash devices BOOT_DEV= sda
Replacing inittab for node - host
INIT: version 2.88 booting
Setting up sysV scripts for host node
Installing ata_piix module ... done.
Installing kheaders module ... done.
Unsquashing rootfs ...
is_lxc:1 is_titan_eor: is_stby: suffix: klm_ftrace: /isanboot/lib/modules/klm_ftrace.o
Installing ftrace in lxc 0 mode done
Executing /etc/rc.d/rcS.d//S06exablaze start
Executing /etc/rc.d/rcS.d//S06exablaze start
Not Micron SSD...
Checking all filesystems.cgroups initialized
Generating ssh keys...Done ssh keys
Starting OpenBSD Secure Shell server: sshd ... done sshd.
Checking rpmstore swap in host context.
INIT: Entering runlevel: 3
Stopping crond: OK
Starting crond: OK
grep: /bootflash/platform.inf: No such file or directory
mount: overlay mounted on /usr.
Increase FPGA PCI timeout to 900ms
Linking n9k flash devices
creating flash devices BOOT_DEV= sda
Replacing inittab for node - vsup
INIT: version 2.88 booting
Executing /etc/rc.d/rcS.d//S06exablaze start
Executing /etc/rc.d/rcS.d//S06exablaze start
Unsquashing rootfs ...
vm.min_free_kbytes = 184320
No TOR virtual chassis
skip untra_klms
Enabling 8250 serial driver spurious INTs workaround
Installing isan procfs isan_proc_name=isan26... done.
Installing SSE module with card index 21212 and vslot ID 26 ... done.
Creating SSE device node 243 ... done.
cg controllers already mounted at /var/cgroup
Inserting kernel_services module ... is_lxc:1 is_titan_eor: is_stby:0 suffix: klm_ftrace: /isanboot/lib/modules/klm_ftrace.o
done.
Making kernel_services character devices
klm_ftrace already loaded. skip.
Loading I2C driver ... done.
Installing CCTRL driver for card_type 99 in vslot ID 26 without NEED_GEM ... done.
Loading IGB driver ...
Checking all filesystems.done.
Extracting rpms from image...
Installing SPROM driver ... 21212 IS_N9K done.
Installing pfmsvcs module ...done.
Installing nvram module ... done.
Installing if_index module with port mode 6 ... done.
Installing fcfwd
Installing RNI lcnd ... done
Running mode is N9K-ToR ...done
Installing LC netdev container_id=0 is_standby=0 ... done
Installing psdev module ... done.
Installing veobc module ... done.
Clean up previous pcap files present in tmp directory
Checking SR card
Card Index is 21212
SR Card detected.
Inserting eMMC module ...
Inserting OBFL module ... 21.99: eMMC Device found.
21.99: card has mmc
done.
22.00: Making OBFL character devices for mmc
22.05: SR_START (2099200), size 3
mounting plog for N9k!
22.06: mounting plog for N9k!
22.08: Done..mounting plog for N9k!
Mounting OBFL for eMMC
Attach blkoops
27.41: Before mounting blkoops
27.90: After mounting blkoops
28.20: recreate_mmcftrace_rr_device
/
Calling install_tor for TOR
copying common rpm to ftp
update-alternatives: Linking /usr/bin/unshare to /usr/bin/unshare.util-linux
COPY the image to ORIG_LC_FS_PATH
tune2fs 1.45.6 (20-Mar-2020)
Setting reserved blocks percentage to 0% (0 blocks)
Removing any system startup links for cgroups-init ...
Adding system startup for /etc/init.d/cgroups-init.
Loading system software
/logflash/stats_ssd/.ssd_current_data file exist!!!
moving /logflash/stats_ssd/.ssd_current_data to /logflash/stats_ssd/.ssd_lastboot_data
Starting crond: OK
kernel.core_pattern = |/bin/sparsecore.sh %p %h %P
Starting rpcbind daemon...done.
Generating ssh keys...creating NFS state directory: done
starting 8 nfsd kernel threads: done
starting mountd: done
starting statd: done
Saving image for img-sync ...
exit code: 1
Installing local RPMS
Stopping crond: OK
Not Micron SSD...
Not Micron SSD...
Not Micron SSD...
Done ssh keys
Starting OpenBSD Secure Shell server: sshd ... grep: /bootflash/platform.inf: No such file or directory
done sshd.
Starting crond: OK
Patch Repository Setup completed successfully
Creating /dev/mcelog
Starting mcelog daemon
N9K CPA setup done
N9K TOR LC CPA setup done
INIT: Entering runlevel: 3
FIXME : sundown detcted use temp librockyf_sun.so ..
Moving 506 version servo
Running S93thirdparty-script...
vlc_card_index 0
S26: sw_id 21212 vp 0
S26 B: sw_id 21212, Moving libcrdcfgdata_tah_tor.so to libcrdcfgdata.so
Starting lem_drv driver
done
Netbroker support IS present in the kernel.
done
Disabling cisco netbroker hooks ... done
Skipping EMON in TOR ...
Executing Prune clis.
Removing exusd cli files if it is not exbl_card in prune_clis
ethernet switching mode Wed Jan 22 06:16:36 UTC 2025
prepare span CLI4. Check EPLD Status
s9# show install all impact epld bootflash:n9000-epld.10.4.4.M.img
Retrieving EPLD versions.... Please wait.
Images will be upgraded according to following table:
Module Type EPLD Running-Version New-Version Upg-Required
------ ---- ------------- --------------- ----------- ------------
1 SUP MI FPGA 0x20 0x20 No
1 SUP IO FPGA 0x13 0x13 No
27 SUP MI FPGA 0x20 0x20 No
27 SUP IO FPGA 0x13 0x13 No
Compatibility check:
Module Type Upgradable Impact Reason
-------------------------------------------------
27 SUP Yes disruptive Module UpgradableUpgrade NXOS & EPLD Together
N9K-93180YC-FX3# install all nxos bootflash:nxos64-cs.10.4.4.M.bin epld bootflash:n9000-epld.10.4.4.M.img
Installer will perform compatibility check first. Please wait.
Installer is forced disruptive
Verifying image bootflash:/nxos64-cs.10.4.4.M.bin for boot variable "nxos".
[####################] 100% -- SUCCESS
Verifying EPLD/FPGA image bootflash:/n9000-epld.10.4.4.M.img.
[####################] 100% -- SUCCESS
Verifying image type.
[####################] 100% -- SUCCESS
Preparing "nxos" version info using image bootflash:/nxos64-cs.10.4.4.M.bin.
[####################] 100% -- SUCCESS
Preparing "bios" version info using image bootflash:/nxos64-cs.10.4.4.M.bin.
[####################] 100% -- SUCCESS
Performing module support checks.
[####################] 100% -- SUCCESS
Notifying services about system upgrade.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes disruptive reset default upgrade is not hitless
27 yes disruptive reset default upgrade is not hitless
Images will be upgraded according to following table:
Module Image Running-Version(pri:alt) New-Version Upg-Required
------ ---------- ---------------------------------------- -------------------- ------------
1 lcn9k 10.3(5) 10.4(4) yes
27 nxos 10.3(5) 10.4(4) yes
27 bios v01.09(10/08/2023):v01.08(05/06/2022) v01.09(10/08/2023) no
FPGA microcode will be upgraded according to following table:
Module Type EPLD Running-Version New-Version Upg-Required
------ ---- ------------- --------------- ----------- ------------
27 SUP MI FPGA 0x18 0x20 Yes
27 SUP IO FPGA 0x13 0x13 No
EPLD Upgrade may result in multiple modules going offline.
Switch will be reloaded for disruptive upgrade.
Do you want to continue with the installation (y/n)? [n] y
Install is in progress, please wait.
Setting boot variables.
[####################] 100% -- SUCCESS
Performing configuration copy.
[####################] 100% -- SUCCESS
Module 1: Refreshing compact flash and upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS
Module 27: Refreshing compact flash and upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS
EPLD/FPGA upgrade can take upto 4 mins.
Performing EPLD/FPGA upgrade bootflash:/n9000-epld.10.4.4.M.img.
[####################] 100% -- SUCCESS
System will be reloaded in a few seconds...